Keeping your house and roof clean is essential, especially during the monsoon season. If there is clog and debris in the roof and gutter, it can cause drainage problems. A dirty and moist roof is the ideal birthplace for mould, algae etc. Your house roof should always be clean and a pressure cleaning service is ideal for that. When you have not paid attention to your roof for a long time, then simple scraping and scrubbing will not be sufficient. Therefore, you must know about pressure cleaning techniques.
What Is A High-Pressure Roof Cleaning?
In high-pressure roof cleaning professional cleaners use pressurized water to loosen accumulated debris. A jet water spray helps to remove all old dirt, algae, mould etc. In the usual roof cleaning method scrubbing and wiping, techniques are used. But a high-pressure roof cleaner uses pressurized water to clean the roof.
People often get confused between power wash and pressure washing. A power wash is a completely different technique that is usually used for heavy-duty cleaning jobs in an industrial setting. Also, power wash uses hot water, unlike pressure wash.
Step By Step Roof Pressure Wash –
At first, the high-pressure roof cleaner will set up the machine to the necessary pressure level. They will check the water flow and if the machine is working fine. Machine oil level must be checked to ensure smooth work procedure.
Then, the cleaner will clean the mould growth from the upper level of the tiles using very low pressure. By using the right pressure, they will gradually clean the entire roof without using any toxic chemical substances. The cleaner must use the right equipment and accessory to provide the finest cleaning.
How Much Pressure Should You Use?
If you find a ‘professional roof cleaner near me’ then you do not have to worry about it. However, knowing the right pressure levels can be helpful for you for many reasons. You can keep a check on the service provider if they are using the right force or not. Also, if you have to operate the machine yourself you will know how much pressure to use.
For bricks recommended pressure is low, something between 1500 to 2500 PSI. But in terracotta or metal roofs you can use pressure as high as 4000 PSI. However, remember limestone cannot withstand so much pressure, if you have limestone tiles, use pressure as low as 700 to 800 PSI.
Why Should You Use Roof Cleaning Pressure Washer?
Normal cleaning cannot remove old and tough stains, stubborn moss and algae growth pretty easily. Using a pressure washer makes the job easier and less time-consuming. In pressure cleaning, you do not have to use any harmful chemicals like bleach. Bleach or acids can discolour your roof tiles or walls very easily.
Also, using them can be dangerous for the cleaner as well. The method of pressure cleaning using the right pressure is very safe and effective in cleaning stubborn dirt. It takes minimum time and effort to put forward the best cleaning results.
The Bottom Line
If you want your property to stay in a good shape for coming many years, you should keep it in regular maintenance. You should avoid mould growth, leakage, damage etc., with a roof cleaning pressure washer. Also, remember this is highly professional work, so you should always consider calling professional cleaners who are trained to handle such machinery.
If you are in Australia, you should contact Rhino Pressure Cleaning, one of the most trusted names in the industry. Their expert cleaners can turn your house roof into a new one in just a few hours.
Rhino Pressure Cleaning 